Protect B. PRO line-interactive UPS

With its increased power factor of 0.9lag the Protect B PRO belongs to the most efficient line-interactive UPS systems. The parallel operation of USB/RS232 interface and the extension slot enables more communication options. Protect B Pro can be configured via the operator panel. The innovative folding mechanism allows batteries to be changed without disconnecting the UPS.

Key Features

- Modern VI (line-interactive) protection technology
- High efficiency
- Compact dimensions and variable use due to combination design tower/rack, display rotatable
- Overvoltage protection for RJ11/RJ45 connections
- multi-language display showing most important UPS data
- Intelligent monitoring via USB/ RS232 interfaces
- 36 months warranty on UPS and battery (only with registration)

Description

Higher efficiency:
The Protect B. PRO achieves more than 30% higher power in comparison to conventional uninterruptible power systems, due to it‘s new power factor rating of 0.9 lagging across it‘s operating range.

Display:
The display shows several parameters: input, UPS mode and output. Three LEDs at the top of the display indicate the current operating mode. From the control panel the user is able to configure the UPS settings and activate an audible alarm.

Battery management:
The battery management system is able to differentiate between initialization during setup, the battery charging phase (temperature compensated) and the standby phase. This enables the system to extend battery lifetime as there is a decrease of pole corrosion.

Communications options:
Communication options are provided by several interfaces including programmable potential-free contacts, emergency power off switch, RS232, USB and an extension slot that can be used in parallel mode.

Autonomy Times

Autonomy time in min.
pf = 0.9lag

full
load

half
load

Protect B.750 PRO

4,5

10,5

Protect B.1000 PRO

3,5

9,5

Protect B.1400 PRO

5,5

13,5

Protect B.1800 PRO

10

28

Protect B.1800 PRO + 1 BatteryPack

26

62

Protect B.1800 PRO + 2 Battery Packs

44

100

Protect B.2300 PRO

4

14

Protect B.3000 PRO

4

11

 

 

Images

  • Rack Version

  • Battery Pack

  • Rotatable Display

  • Battery Exchange

  • BatteryPack

    rack version

  • Protect B.3000 PRO

    rear view

  • Tower Version

  • Display (in German)

  • SNMP Adapter

    The SNMP adapters enable users to monitor the status of UPS units via internet or ethernet connection

  • Relay Card

    Relay cards provide communication via potential free contacts and can be used for communication between UPS and AS/400 devices.