Gas

Reliable power supplies are crucial for safety and efficient operation of gas processing and booster stations. Power outages or minor deviations in the power supply of gas turbine control or in the process chain, can lead to serious environmental and financial impacts. Gas processing plants rely on customized and uninterruptible power supply to protect the different stages in the gas extraction, purification and liquefaction process of liquefied natural gas (LNG).


Filter products(0)

  • SystemType
  • Input
  • Output
  • Market/Industry
  • Technology
  • Housing
  • Battery Voltage
    • -
  • Capacity
    • -
      -

Reset Filter

Results 16

  • Protect RCS mSPRe

    • 10A - 25A

    The Protect RCS mSPRe system has been developed and designed to provide high reliability power supply and battery charging capability. The Protect RCS mSPRe system is a single-phase thyristor-controlled rectifier suitable as a direct DC power supply.

    Show product

  • Transokraft 1 N1

    The analog Transokraft inverters are suitable for secure, uninterrupted supply to critical loads which require an AC voltage supply independent of the mains power system and the faults which may occur. This independent supply avoids interruptions to the connected loads caused by mains power failures, mains voltage deviations or mains frequency deviations, any of which may result in considerable financial loss and physical danger. 

    Show product

  • Protect Flex

    • 10 - 160 kVA
    • modular design
    • up to 4 units in parallel operation

    Protect Flex is based on a new concept of UPS systems that combines a modular architecture based on 10 and 15 kVA/kW hot-swappable power modules with a customizable set of options.

    Show product

  • Protect 8 INV1/3

    Protect 8 INV is an extremely robust, both electrically and mechanically, industrial inverter. It' is custom-designed for use in harsh industrial environments to meet the toughest requirements at a small footprint. Full digital and redundant controls provide high reliability. The systems' high efficiency is also achieved even at low output power and it is compatible with every type of battery.

    Show product

  • Protect MIP INV

    The inverter system is designed for all industrial applications and provides secured power for all types of AC loads. The design is modular and scalable with hot- swappable inverter modules which ensures low Mean Time to Repair (MTTR), reduction in service costs and meets the changing needs for future expansion. The inverter uses “Twin Sine Inverter” (TSI) technology that eliminates all single points of failure with full scalability; up to 32 modules in parallel and high efficiency of up to 96% reducing operating costs.

    Show product

  • AC 7000 CAN

    • 110 V / 60 A
    • 220 V / 30 A

    Show product

  • Protect MIP rack-mount

    • 24 V / 50 A
    • 48 V / 40 A
    • 120 V / 15 A

    Show product

  • Transokraft 3 N1

    The analog Transokraft inverters are suitable for secure, uninterrupted supply to critical loads which require an AC voltage supply independent of the mains power system and the faults which may occur. This independent supply avoids interruptions to the connected loads caused by mains power failures, mains voltage deviations or mains frequency deviations, any of which may result in considerable financial loss and physical danger.

    Show product

  • Protect RCS MIPe

    • 9A - 900A output DC current

    State of the art switch mode technology, N+1 redundant Protect RCS MIP rectifier system is designed to be scalable, simple to use and easy to maintain with hot swappable rectifier modules.

    Show product

  • Protect 8 R

    • 2.4 - 275 kW

    Protect 8 R is a rectifier and charger designed for non clean office environments combining robustness with high availability. The industrial power solution converts the mains alternating voltage into high-quality direct voltage with battery charge and monitoring controls.

    Show product

  • Profitec S N1

    • 24 Vdc; 63 - 2500 A
    • 48 / 110 / 220 Vdc; 63 - 1250 A
    • 1E Class

    The Profitec S N1 is a 100% analog rectifier. All regulation and monitoring PCBs (built up in SMD method) contain no software and no programmable components or devices. The invention of a 100% software-free rectifier is due to the DC power supply security and new requirements for safety and qualification processes.

    Show product

  • Protect RCS Outdoor

    • 50A - 250A

    Protect RCS is designed to provide high reliability power supply and battery charging capability. The Outdoor version provides the same level of protection to your equipment and processes and complies with the stringent protection standards according to IEC 60529 (IP 65). Protect RCS is a thyristor-controlled rectifier suitable for charging nickel-cadmium or lead-acid batteries while supplying DC loads.

    Show product