Protect D Li-ion Single Phase In/Out UPS System

1000 – 3000 VA uninterruptible power supply with integrated lithium-ion batteries

With a high power factor of 1 the Protect D series exceeds the power of conventional UPS systems by 10 %. Efficiency is significantly increased during normal operation as well as in the energy-efficient ECO operating modes. The height of the UPS electronics and battery together is only 2 U. The autonomy times can be increased with additional battery packs; connected battery packs are automatically detected. Our advanced battery charging technology allows for short charging times and battery-preserving charging characteristics at the same time. A real-time event logger ensures careful observation and analysis of events as they occur. In addition, a regular automated battery test can be planned.

Comprehensive UPS protection

Online UPS topology, also known as double-conversion, provides reliable protection against all 9 kinds of power supply failures. It provides clean power thanks to connected loads that are constantly supplied from the battery.

Energy saving

Due to its high efficiency, power consumption is very low. Over its product lifetime, the savings in terms of money and power are higher than older systems, making this a good replacement unit.

UPS TOPOLOGY Double Conversion (VFI)
CAPACITY 1 - 3 kVA
INPUT/OUTPUT 1-phase/1-phase
NOMINAL VOLTAGE 200 / 208 / 220 / 230 / 240 VAC
POWER FACTOR 1
Benefits
  • Wide capacity range from 1 kVA to 3 kVA including internal battery and up to 4 additional external battery packs
  • Extended battery lifetime thanks to lithium-ion technology, lower TCO than lead-acid solutions
  • The UPS comes with advanced monitoring and management capabilities, enabling real-time visibility into power usage, battery health, and performance statistics
  • Advanced fault detection mechanisms, ensuring early identification of potential issues and preemptive actions to prevent downtime.
  • May also be used as a frequency converter
  • Usable as rack or tower version
Characteristics
  • VFI topology (online / double conversion) protects against all network problems
  • Maximum output power factor is 1, VA=W
  • Level 3 built-in lithium battery connection, synchronization with UPS (SOC, SOH, behavior, external balancing)
  • Compact design: 2U UPS + 1U per battery
  • Long backup time with up to 4 optional battery packs and automatic detection
  • Rack/tower dual set-up with rotatable LCD panel
  • USB, RS232 port, dry contacts, RPO & ROO connectors, optional SNMP/Modbus
  • Maintenance bypass accessory with load segment control
  • Certification: UN38.3, UL1973, IEC62019, CE, IEC62040
Model
D 1000 LI-ION
D 1500 LI-ION
D 2000 LI-ION
D 3000 LI-ION
Part Number
300 05 308
300 02 309
300 05 310
300 05 321
Power Rating
1000 VA
1000 W
1500 VA
1500 W
2000 VA
2000 W
3000 VA
3000 W
Size W x H x D (mm)
438 (19") x 85.5 (2 U) x 445
438 (19") x 85.5 (2 U) x 445
438 (19") x 85.5 (2 U) x 608
438 (19") x 85.5 (2 U) x 608
Weight
15.1 kg
15.1 kg
21.3 kg
21.3 kg
Input Voltage
110-300 VAC (160-300 @100%)
Outlets
8 x IEC 320 C13
8 x IEC 320 C13
8 x IEC 320 C13
8 x IEC 320 C13 + 1 x IEC 320 C19
Battery packs (external)
up to 4 units, 1U each

 

Additional battery pack

  • PROTECT D 1015 LI-ION EBP 48V12Ah
    Compatible with Protect 1000 LI-ION and Protect 1500 LI-ION, maximum 4 External battery packs can be installed per UPS. 
  • PROTECT D 2030 LI-ION EBP 76,8V12Ah
    Compatible with Protect 2000 LI-ION and Protect 3000 LI-ION, maximum 4 External battery packs can be installed per UPS.
Communication

 

  • Additional SNMP communication card, budget card- 30919556
  • Additional SNMP communication card, PRO card, temperature and humidity sensors can be connected. 30919557–*WEB
  • Temperature sensor to be installed together with SNMP PRO card – 30001020
  • Temperature + humidty sensor to be installed together with SNMP PRO card  – 40004657
  • Additional Output and input relay card, includes 5 programmable output contacts and three digital inputs – 30909253
TECHNICAL LEAFLET Download
USER MANUAL Download
QUICK INSTALLATION MANUAL Download
EXTERNAL BATTERY PACK INSTALLATION MANUAL Download
Product Replacement

Should you be facing technical issues with your UPS within the warranty period you can return the defect unit to us and request a replacement. Please fill out this form

das Formular auf Deutsch

Warranty Extension

Do you want to be safe and fully covert? Then you can extend the warranty up to 60 months which covers UPS and batteries.

Five Years Warranty Protect D Li-Ion

Download here the Five Years Warranty for AEG Power Solutions UPS Models:
Protect D Li-Ion 1000VA, 1500VA, 2000VA, 3000VA  – Download

Dynamic Runtime Calculator

Select the UPS to calculate the autonomy depending on the load:

Call in the experts

We are ready and waiting to offer trusted, expert advice on how to overcome your power challenges and set your organization up for the future. Please get in touch and we will show you what we can do.

Get in touch
Sign up to our newsletter

Be the first to hear about our latest work, insights and successes.