Protect C Online UPS

The new Protect C models in the 1000, 2000 and 3000 VA offer higher performance level thanks to their unity power factor and top efficiency, representing the consistent development of this well-proven and highly reliable series.

Protect C 6000 and C 10000 offer the possibility of parallel operation. Both active redundancy and higher availability are achieved with higher power requirements being taken into account. Also, the combination of power increase and active redundancy is possible, as up to 3 devices can be switched in parallel. Protect C meets the highest security and availability requirements and allows for an economical implementation.

Comprehensive UPS protection

Online UPS topology, also known as double-conversion, provides reliable protection against all 9 kinds of power supply failures. It provides clean power thanks to connected loads that are constantly supplied from the battery.

Energy saving

Due to its high efficiency, power consumption is very low. Over its product lifetime, the savings in terms of money and power are higher than older systems, making this a good replacement unit.

UPS TOPOLOGY Double Conversion (VFI)
CAPACITY 1 - 10 kVA
INPUT/OUTPUT 1-phase/1-phase
NOMINAL VOLTAGE 220 / 230 / 240 VAC
POWER FACTOR 1
FEATURES
  • VFI topology (online / double conversion) protection against all mains network problems
  • Top class performance thanks to power factor 1, enhanced available performance by approx. 11%
  • Extremely wide input voltage window of 110 VAC to 300 VAC without stress on the internal battery system and with a stable output voltage
  • ECO mode for high efficiency operation
  • Frequency converter mode
  • MODBUS TCPIP included through RJ45
  • Expansion slot for SNMP, potential free contacts, remote display
  • Graphic LCD display with interactive multilingual user interface
  • Configuration options (password protected via the input panel
  • Internal event data log with plain text display and date / time stamp
  • Emergency power off on terminal block (potential-free)

 

BENEFITS

Model
Protect C 1000
Protect C 2000
Protect C 2000S
Protect C 3000
Protect C 3000S
Part Number
3000 4615
3000 4616
3000 4626
3000 4617
3000 4616
Power rating
1000 VA / 1000 W
2000 VA / 2000 W
2000 VA / 2000 W
3000 VA / 3000 W
3000 VA / 3000 W
Size
W x H x D (mm)
145 x 220 x 404
192 x 318 x 428
Weight
13 kg
26 kg
11 kg
26.4 kg
11.4 kg
Voltage range
160 - 300 VAC @ 100% load, 110 - 160 VAC derating to 50% load linearly
Outlets
4 x IEC 320 C13
8 x IEC 320 C13
8 x IEC 320 C13 + hardware terminal
Max EBPs
6
Waveform
Sinusoidal, distortion THD <1 %
Model
Protect C 6000
Protect C 10000
Part No.
30924505
30924507
Power rating
6000 VA / 6000 W
10000 VA / 10000 W
Size W x H x D (mm)
225 x 589 x 452
Weight
61 kg
71 kg
Voltage Range
110 – 275 VAC
Outlets
Secured terminal block
Max EBPs
4
Waveform
Pure sine wave
Manual Bypass Switches
  • MBS 2000
    10A nominal, up to 2000 VA
    210 mm x 88 mm x205 mm
    600 000 3039
  • MBS 3000
    16A nominal, up to 3000 VA
    210 mm x 88 mm x205 mm
    600 000 3040
  • MBS 10000
    32A nominal, up to 10000 VA
    500 mm x 400 mm x 210 mm
    600 000 7684
  • MBS 24000
    32 – 125A nominal, up to 24000 VA
    600 mm x 380 mm x 350 mm
    100 000 2021
Ext. Battery Packs
  • Protect C 1000 BP
    for Protect 1000
    12V/7Ah x 3 x 2 batteries
    145 x 220 x 404 mm, 16.8 kg
    3000 4618
  • Protect C 2030 BP
    for Protect C 2000 / 3000 (S)
    12V/7Ah x 8 x 2 batteries
    192 x 318 x 428 mm, 38.7 kg
    3000 4619
  • Protect C 6000 BP
    for Protect C 6000
    12V/9Ah, 2 x 16 batteries
    220 x 589 x 492 mm, 111 kg
    6000024509
  • Protect C 10000 BP
    for Protect 10000
    12V/9Ah, 2 x 20 batteries
    220 x 589 x 492 mm, 115 kg
    6000024510
Connectivity
  • WEB / SNMP managment card
    RJ45
    6000019556
  • WEB / SNMP PRO managment card
    with senor connection
    RJ45+Mini DIN
    6000019557
  • Temperature sensor
    for WEB/SNMP card
    Mini-DIN – DB9
    8000020878
  • Temperature and humidity sensor
    for WEB/SNMP card
    Mini-DIN – DB9
    8000022493
  • Extension cord
    for 8000020878 or 8000022493
    Mini-DIN – DB9
    6000007365
  • Relay card
    Sub-D9
    6000003932
  • Relay card
    programmable with RS232-interface
    Connector clamps
    6000009253
User Manual 1-3 kVA Download
User Manual 6&10 kVA Download
Technical Leaflet Download
Accessories Download
Protect C 3000 WD Download
Product Replacement

Should you be facing technical issues with your UPS within the warranty period you can return the defect unit to us and request a replacement. Please fill out this form

Warranty Extension

Do you want to be safe and fully covert? Then you can extend the warranty up to 60 months which covers UPS and batteries.

Call in the experts

We are ready and waiting to offer trusted, expert advice on how to overcome your power challenges and set your organization up for the future. Please get in touch and we will show you what we can do.

Sign up to our newsletter

Be the first to hear about our latest work, insights and successes.