Search Icon

Protect D Single phase in / out UPS system

  • Protect D 3000
  • Protect D 10000 + Battery Pack
  • Protect D 1000 - 2000
  • Protect D 3000 connectors
  • Protect D 10000 + BatteryPack
1/5

1000 – 10000 VA uninterruptible power supply

With a high power factor of 0.9 the Protect D 1-3 kVA exceeds the power of conventional UPS systems by 20%. Efficiency is significantly increased during normal operation as well as in the energy-efficient ECO operating modes. Protect D 6000 and D 10000 compliment the range of the successful Protect D series. With Protect D 10000, a power level of 10 kVA in rack design is available for the first time. Protect D 6000 and Protect D 10000 have the same advantages and characteristics as the smaller models, including the higher power factor of 1.

Read more

Contact Sales Customer References

Comprehensive UPS protection open

Online UPS topology, also known as double-conversion, provides reliable protection against all 9 kinds of power supply failures. It provides clean power thanks to connected loads that are constantly supplied from the battery.

Energy saving open

Due to its high efficiency, power consumption is very low. Over its product lifetime, the savings in terms of money and power are higher than older systems, making this a good replacement unit.

Scalability open

Parallel operation makes it flexible to adapt the capacity to changing load requirements
  • UPS Topology Double Conversion (VFI)
  • Capacity 1 - 10 kVA
  • Input/Output 1-phase/1-phase
  • Nominal Voltage 220 / 230 / 240 VAC
  • Power Factor 0.9 / 1

Open Navigation

      

Model Protect D 1000 Protect D 1500 Protect D 2000 Protect D 3000 Protect D 6000 Protect D 10000
Part Number 6000024427 6000024429 6000024432 6000024433 6000025604 6000025605
Power rate 1000 VA
900 W		 1500 VA
1350 W		 2000 VA
1800 W		 3000 VA
2700 W		 6000 VA
6000 W		 10000 VA
10000 W
Size  W x H x D (mm) 482.6 (19") x 88 (2 U) x 430 482.6 (19") x 88 (2 U) x 600 482.6 (19") x 86 (2 U) x 573 482.6 (19") x 86 (2 U) x 573
Weight 16 kg 19.7 kg 19.7 kg 29.5 kg 13 kg 14.7 kg
Voltage range 120 – 276 V AC (depending on nominal input voltage) 176 V AC (120 V AC to 50 % utilization) – 276 V AC (depending on nominal input voltage)
Outlets 8 x IEC 320 C13 (4+4) 8 x IEC 320 C13 (4+4)
+ 1 x IEC 320 C19		 UPS: 1 x fixed connection on terminal block + 2 x IEC 320 C13,
Connection Unit: 4 x IEC 320 C13 + 2 x IEC 320 C19
Integrated battery type and number 12 V/9 Ah x 3 12 V/9 Ah x 4 12 V/9 Ah x 6 12 V/9 Ah x 6 12 V/9 Ah x 16
(not integrated, ext. BP)		 12 V/9 Ah x 20
(not integrated, ext. BP)
Max number of external battery packs 4
Waveform Sinus, distortion THD <3 % Sinus, distortion THD <5 %
Still looking for something?