Protect D Single phase in / out UPS system

1000 – 10000 VA uninterruptible power supply

 

With a untity power factor (VA=W), Protect D series exceeds the power of conventional UPS systems by 11%. highest effiency, increased up to top level in class, during normal operation as well as in the energy-efficient ECO operating modes.

Protect D 6000 and D 10000 compliment the range of the successful Protect D series. With Protect D 10000, a power level of 10 kVA in rack design is available for the first time. Protect D 6000 and Protect D 10000 have the same advantages and characteristics as the smaller models, including the higher power factor of 1.

Comprehensive UPS protection

Online UPS topology, also known as double-conversion, provides reliable protection against all 9 kinds of power supply failures. It provides clean power thanks to connected loads that are constantly supplied from the battery.

Energy saving

Due to its high efficiency, power consumption is very low. Over its product lifetime, the savings in terms of money and power are higher than older systems, making this a good replacement unit.

UPS TOPOLOGY Double Conversion (VFI)
CAPACITY 1 - 10 kVA
INPUT/OUTPUT 1-phase/1-phase
NOMINAL VOLTAGE 220 / 230 / 240 VAC
POWER FACTOR 1
BENEFITS
  • Highest performance in class: Power factor 1 and top effiency.
  • New “S”-version with higher charging power for extended autonomy times.
  • Easy battery replacement through front.
  • Integrated MODBUS TCP-IP communication protocol.
  • Several interfaces (RS232 /USB/ Slot/ EPO) as well as a potential free contact within the series ensure an outstanding communication capacity.
  • Multilingual graphic screen is very easy to read thanks to its large format.
  • The UPS can be directly administered with the control panel.
  • May also be used as a frequency converter.
  • Usable as rack or tower version

FEATURES

  • VFI topology (online / double conversion) protects against all network problems
  • Top class performance thanks to power factor 1, enhanced available performance by approx. 11%.
  • Increased efficiency through the ECO mode
  • Extremely wide input voltage window of 110 VAC to 300 VAC without stress on the internal battery system and with a stable output voltage
  • Advanced battery charging technology for maximum durability of the battery
  • Additional battery packs for easy scaling of the autonomy times (Up to 6 EBP)
  • MODBUS TCPIP included through RJ45
  • Extension slot for communication cards; communication in parallel is possible through the RS232 / USB interface and SNMP
  • Low height (2 U) including integrated batteries
  • Switchable UPS outputs for load shedding
  • Display of the UPS parameters on a graphic LCD, direct configuration is possible with the control panel
  • Freely programmable potential-free contact plus emergency shutdown contact
  • Suitable for IT cabinets with a depth of 800 mm
  • Usable as rack or tower version
Special characteristics of Protect D 6000/10000
  • Very easy assembly through connection unit with manual maintenance bypass switch
  • Parallel operation of up to 3 units
  • UPS including battery, connection unit with manual bypass fits within 5 standard height units (2U UPS + 3U battery)
Model
Protect D 1000
Protect D 1500
Protect D 2000
Protect D 3000
Protect D 2000S
Protect D 3000S
Part Number
3000 4620
3000 4621
3000 4622
3000 4623
3000 4628
3000 4629
Power rating
1000 VA
1000 W
1500 VA
1500 W
2000 VA
2000 W
3000 VA
3000 W
2000 VA
2000 W
3000 VA
3000 W
Size W x H x D (mm)
438 x 85.5 (2U) x 445
438 x 85.5 (2U) x 600
Weight
16.3 kg
17.8 kg
25.3 kg
28.2 kg
12.6 kg (no batt.)
13 kg (no batt.)
Voltage range
160 – 300 VAC 100% load, 110 – 160V derating to 50% load linearly
Outlets
1 main outlet group (with 4 x IEC C13) and 1 programmable outlet group (with 4 x IEC C13)
1 main outlet group (1 x IEC C19 + 4 x IEC C13) + 1 programmable outlet group (with 4 x IEC C13)
Max amount of EBPs
6
Waveform
Sinusoidal, distortion THD <3 %
Model
Protect D 6000
Protect D 10000
Part Number
30925604
30925605
Power rating
6000 VA
6000 W
10000 VA
10000 W
Size W x H x D (mm)
482.6 (19”) x 86 (2U) x 573
Weight (wo/with batteries)
13 / 58 kg
14.7/75 kg
Voltage Range
176 VAC (120 VAC to 50 % utilization) – 276 VAC
Outlets
UPS: 1 x fixed connection on terminal block + 2 x IEC 320 C13,
Connection Unit: 4 x IEC 320 C13 + 2 x IEC 320 C19
Max. amount of EBPs
5
Waveform
Pure sine wave
Ext. Battery Packs (EBPs)
  • Protect D 1015 BP
    438 x 88 x 445 mm; 23 kg
    3000 4624
  • Protect D 2030 BP 
    438 x 88 x 445 mm, 40 kg
    3000 4625
  • Protect D 6000 BP
    482.6 x 129 x 593 mm; 52 kg
    3092 4439
  • Protect D 10000 BP
    482.6 x 129 x 593 mm; 62 kg
    3092 4440
Manual Bypass Switches
  • MBS 2000
    10A nominal, up to 2000 VA
    210 mm x 88 mm x205 mm
    600 000 3039
  • MBS 3000
    16A nominal, up to 3000 VA
    210 mm x 88 mm x205 mm
    600 000 3040
  • MBS 10000
    32A nominal, up to 10000 VA
    500 mm x 400 mm x 210 mm
    600 000 7684
  • MBS 24000
    32 – 125A nominal, up to 24000 VA
    600 mm x 380 mm x 350 mm
    100 000 2021
Communication
  • WEB / SNMP card
    RJ45
    6000019556
  • WEB / SNMP PRO card
    with sensor connection
    RJ45+Mini DIN
    6000019557
  • Temperature sensor
    Mini-DIN – DB9
    8000020878
  • Temp. & humidity sensor
    Mini-DIN – DB9
    8000022493
  • Sensor extension cord
    Mini-DIN – DB9
    6000007365
  • Relay card
    Sub-D9
    6000003932
  • Relay card programmable
    RS232, Connector clamps
    6000009253
Technical Leaflet Download
User Manual 1-3kVA Download
User Manual 6&10 kVA Download
Accessories Download
Product Replacement

Should you be facing technical issues with your UPS within the warranty period you can return the defect unit to us and request a replacement. Please fill out this form
das Formular auf Deutsch

Warranty Extension

Do you want to be safe and fully covert? Then you can extend the warranty up to 60 months which covers UPS and batteries.

Call in the experts

We are ready and waiting to offer trusted, expert advice on how to overcome your power challenges and set your organization up for the future. Please get in touch and we will show you what we can do.

Get in touch
Sign up to our newsletter

Be the first to hear about our latest work, insights and successes.